April 10, 2026

⚠️ Need your PCM repaired? 👉 Start your repair here

What does code P2112 mean?

A P2112 trouble code indicates that the throttle actuator is stuck in the closed position. This means the throttle plate is not opening properly when you press the accelerator, preventing the engine from getting enough air.

Because modern vehicles use an electronic throttle control (ETC) system, the PCM monitors throttle movement closely. If the throttle fails to open as expected, it triggers this code.

👉 Need help understanding PCM failures? Start here: What Does an ECM Do in a Car?

Common symptoms of a P2112 code

• Engine may not accelerate
• Very low power or no throttle response
• Vehicle may stall
• Check engine light on
• Vehicle stuck in limp mode
• Hard starting or no start in some cases

What can cause a P2112 code?

• Dirty or clogged throttle body
• Carbon buildup restricting throttle movement
• Faulty throttle actuator motor
• Throttle position sensor issues
• Wiring or connector problems
• Mechanical obstruction in throttle body
• PCM-related faults in some cases

This code is often caused by restricted airflow due to a stuck throttle plate.

Is P2112 serious?

Yes — since the throttle cannot open properly, the vehicle may not accelerate or may stall, making it difficult or unsafe to drive.

How is P2112 diagnosed?

• Scan for additional trouble codes
• Inspect throttle body for buildup or blockage
• Check throttle plate movement
• Test throttle actuator motor
• Inspect wiring and connections
• Verify throttle position sensor readings

Visual inspection is especially important for this issue.

How do you fix a P2112 code?

• Clean the throttle body thoroughly
• Remove carbon buildup
• Repair wiring or connector issues
• Replace faulty throttle actuator motor
• Address sensor-related problems
• Perform throttle relearn procedures
• Test and repair PCM-related issues if necessary

In many cases, cleaning the throttle body resolves the problem.

Can a bad PCM cause a P2112 code?

Yes, although it is less common. The PCM controls throttle movement and monitors position. If it cannot properly control the actuator or interpret signals, it may trigger a P2112 code.

💰 PCM Repair vs Replacement

• Dealership Replacement: $1,000 – $2,500+
• Repair & Return Service: Faster and more affordable ✅
• Plug-and-Play Options Available

At AutoPCMS, we specialize in repairing and programming PCM modules to restore throttle control and overall performance without the high dealership cost.

👉 Start Your Repair Here 👇

👉 Start your repair here

👉 See repair pricing

👉 Read more PCM symptoms and warning signs

🧠 Final Thoughts

The P2112 code indicates the throttle is stuck closed, preventing proper airflow into the engine. This can lead to poor performance, stalling, or a no-acceleration condition.

👉 Fixing the issue quickly helps restore normal engine operation and ensures safe driving.

👉 Still dealing with a P2112 code? Start your repair here

🔗 Related Trouble Codes You Should Check

If you're diagnosing a P2112 code, you may also want to check:

👉 P2101 Code  
👉 P2116 Code  
👉 P0607 Code

🔗 Related PCM & ECM Guides

👉 7 Symptoms of a Bad PCM
👉 PCM Repair vs Replacement
👉 Start Your PCM Repair Here